Produce Energy Efficient Loft Storage

A lot of us have loft locations in our homes and it is typically unused. Lofts are the space above our plasterboard ceilings where the supporting beams for the roof are. In many cases, these beams are unattended rough wood which doesn’t look terrific and also can give you some pretty nasty splinters! If you venture into this space you have to be careful to stroll and put things on the wooden supporting beams. If you stand on the plasterboard below your foot will most likely go straight through and into the space listed below. This makes the loft area dangerous and unusable. However, you can make some or all of your loft safe to use fairly quickly.

Safety First

To start with prior to venturing into your loft ensure you place on a good quality face mask. Your loft will be dirty but it might also have lots of insulation fibres or even asbestos– so don’t take unnecessary threats. Make sure you have a small supporting board to stand on while you check or work in the loft space. The board is laid throughout a couple of supporting beams and you can then base on it without the risk of your foot going through the ceiling of the room below.


It is reasonable to examine the insulation of your loft before you do anything. Insulation is cotton wool like material that is light and easily compressed. It ought to be laid in between the supporting beams and there could be another layer over this concealing the beams from view entirely. If all you can see is insulting material then walk with care– finding the beams will be difficult and you risk putting your foot through the ceiling. Ensure you get a long piece of wood that you can lay over the insulation and across a number of beams to provide yourself something safe to stand on.

Lay a second layer over the supporting beams in the opposite instructions

If you do not have any insulation– get some. Insulating your loft will make a huge distinction to how warm your home feels and also how costly your energy expenses are. If you are at all concerned with the environment then increasing your insulation is a great method to do your bit. The government advised depth of mineral wool insulation is 270mm which is generally 100mm between the flooring beams and then 170mm over them running in the opposite direction to the beams. If you don’t have this density or your insulation is old and used, then get more or change it. You can buy this from any DIY shop or order it online. It will can be found in rolls and it is easy to put down and cut to shape.

Board It Out!

The first step to making your loft location usable is to add a layer of floorboards. These large wood panels fit over the supporting beams and insulation. You can simply screw or nail the boards into the supporting beams. Now you have a continuous and safe floor which you can utilize to walk on and likewise that will supply support for furniture or any items you wish to save in your loft. If the supporting beams are unequal you might want to put another layer of wood assistances onto it to form a flat wooden skeleton which you can screw the boards into firmly.

If you properly insulated the loft with glass fibre insulation to the government recommended 270mm depth then laying boards straight onto ceiling joists or trusses will compress the top layer of insulation. This will lower the thermal efficiency of the insulation by over 50%! So do not secure the floorboards directly to trusses/joists. Rather use some unique spacers to develop space for the insulation.

Loft Raisers

You can purchase raisers or loft legs which fit between the supporting beams and floorboards. These spacers offer a space for the top layer of insulation so it is not compressed. We stated prior to that the second layer of insulation which laid over the lofts supporting beams is 270mm thick so you need loft raisers of that size. You might want to include much more insulation in which case you need bigger loft legs. You can buy ones that enable a top layer of insulation 400mm thick.

The base of the loft legs are screwed into the supporting beams, then the leading layer of insulation is laid around them and then the floorboards positioned over and screwed into the top of the loft legs. The Loft spacers should be put according to the size of the floorboards so that two boards fulfill in the middle of a loft leg and can be protected to it. Consult the manufacturer for guidelines on how to space their products. You do not need to board the entire loft area. You can select to board a small area near the loft hatch for storage. This is much easier, much faster, cheaper and still gives you some great extra storage that is easily accessed directly from the hatch. The video listed below programs you how and likewise how to fit loft spacers or loft legs.

Thermal Wrap

Now your floor covering insulation and boards are in location you can decide to go one action even more. You can purchase thermal wrap and staple it to beams that raise approximately support the apex of the roofing. This will enhance your insulation much more and can box off the unusable and undesirable corners of your loft space. You might even board over this layer. Note that if you have actually correctly set up loft insulation at the floor level, you do not require to insulate even more with foils at the ceiling level.

Finishing Touches

Your loft is now all set to go. If you do not have electrical energy up there you can install battery powered lights. Go to town with storage boxes make it nice with a carpet and fit a great ladder so you can access your brand-new room quickly.

Post Sponsored by East Ham Roofing – Here for any Leaking Roof Repairs.