Spontaneous breaking is an occupational (although unusual) threat of lots of double-glazed windows– especially those at the cheaper end of the marketplace. At any time of year, a window might all of a sudden choose to collapse inward, causing an unattractive (and heat-inefficient) shatter result.
What causes this strange phenomenon to happen? While it might seem like the window split by itself, there is always a hidden factor at play. In this post, we’ll shed some light on the topic.
How does double glazing work?
In order to understand why a double glazed window might crack, it deserves thinking about how double glazing is built. Two sheets of glass are put either side of a vacuum– or a layer of inert gas like argon– through which heat has problem moving. This produces a barrier which helps to consist of (or push back) heat, and thus keep your house at a stable temperature level– and your energy costs down.
A double-glazed window is a sealed unit, which indicates that the pressure within it is constant, on the other hand with the air pressure on the other side of the glass. This suggests that the glass will be under consistent, very mild pressure. You may discover the glass of a double-glazed window a little deform inwards, depending upon the pressure exterior. In a lot of situations, the glass will be strong enough to endure this pressure. But sometimes, it will not– and stress fractures in the window can appear.
It’s revealing that the peak time for double glazing damages is during winter season. This is a season that we experience chillier outside temperatures– and we attempt to compensate for this inside your home by using main heating. This develops a big distinction in temperature on either side of the glass.
What elements increase the threat of a double-glazed window breaking?
Square (and even round) windows are at the lowest risk of suffering a break. Why might this be? The response depends on versatility. Shorter panes of glass have less chance to flex than larger panes. A high, narrow window, then, will be at the greatest threat of cracking.
As commonplace an innovation as double glazing now is, it’s still something that needs precise engineering in order to get. There are various practices and environmental factors at the point of manufacture which can produce temporary windows.
Producing windows involves, undoubtedly, cutting glass, but it’s essential that these cuts occur only specifically where they’re implied to. Even a small, imperceptible scratch at the centre of a pane of glass can develop a weak point which the elements may later expose. This danger is greater when the cuts needed are more intricate, such as in bevelled glass.
Temperature level and humidity
We’ve already pointed out how breakages become most likely when the temperatures on either side of the glass contrasts significantly, but what about the temperature of the gas inside the unit? If a double-glazed window is produced on a hot summer season’s day, when the atmospheric pressure is low, then it’ll be at greater risk during the winter.
The same is true of the wetness within the system. Double glazing makers use a special substance referred to as a desiccant to absorb all of this wetness and avoid condensation beads from forming inside the window. This process, too, changes the pressure within the window, and so windows developed on hot, humid days will be at higher threat of splitting when the temperature level drops.
Not all desiccants are produced similarly, and some producers look to slash rates by selecting less expensive options. Such desiccants will soak up not only water, however large amounts of nitrogen– which exacerbates any changes in pressure.
Strength of the glass
Naturally, the odds of a window breaking can be lowered if the glass is of adequate strength. A thicker sheet of glass will be much more resistant to stress fractures than a thin one, so it’s often worth choosing a 6mm pane instead of the more typical 4mm. When making this decision, nevertheless, you need to be aware of where the tension is likely coming from. That will depend upon how your house is arranged.
In order to reduce the impact of these ecological aspects, it’s essential that makers employ environmental protections in their factories. While it’s difficult to eliminate the issue altogether, it is possible to minimize the possibility of a break to the point of negligibility. A great manufacturer will use a lengthy warranty against (seemingly) spontaneous window damages.
Heat coming from outside
When it concerns stress on a pane of glass, it’s useful to think not only in terms of quantity, however of concentration. Dispersing heat across the glass will decrease the impact that a concentrated beam of sunlight may have.
In the UK, sunlight originates from the south. This means that throughout winter, south-facing windows are at higher threat of splitting. Overnight, the glass will cool (in many cases to sub-zero temperatures)– and then a beam of sunlight will unexpectedly appear. The centre area will experience a sharp increase in temperature– but for the corners, which are still in shadow, this rise will be much milder. This temperature distinction across the glass will position it under much greater stress, and increase the opportunities of the window splitting.
In order to disperse the heat on those cold winter season days, it’s worth positioning a pale-coloured blind or curtain inside the glass. This will help to show heat back onto the glass, assisting to more evenly distribute the heat.
Heat originating from within
Winter is likewise a time where windows are anticipated to manage large changes in temperature from within, as central heating begins. The biggest threats to your windows from within can be found in the form of intense, regional thermal shock; normally from a radiator or fireplace best beside your window.
If you’ve got an under-window radiator, then it’s worth offering some defence in the form of curtains which fall behind the radiator, and secure the window from thermal shock. You’ll also want to make sure that there is adequate air flow to the window from the remainder of the room.
Post Sponsored by Sunderland Glaziers – Here for all your Window Glass Repairs.